Originally Posted by
sabishii
it seems that the jog wheel doesn't properly enable and disable the fx bank mapping in fader fx mode if it is/was not in scratch mode, i haven't been able to figure it out 100% but if you follow the steps below you should be able to reproduce this
i also noticed when the jog wheel is not in scratch mode that the led turns off (it used to turn blue i think? is this intentional?)
0. already import the vsi into traktor, move your faders to default positions
1. turn on vci
2. boot traktor
3. if the fx bank 1 is already enabled in any decks, disable it with the mouse
(for the rest of the steps use the vci)
4. load track into deck a
5. turn off scratch mode for deck a
6. turn on fader fx mode
7. press fx preset 1 button twice
8. press play
9. touch the deck a jog wheel, fx1 does not become enabled on deck a
10. move the deck a volume fader down, fx1 WILL become enabled on deck a
11. move the deck a volume fader up, fx1 will become disabled on deck a
12. press the scratch mode button for deck a
13. touch the deck a jog wheel, fx1 WILL become enabled on deck a
14. release the deck a jog wheel, fx1 will not become disabled for deck a
15. touch the deck b jog wheel, fx1 will still effect deck a
sorry if this was already mentioned or if I'm missing something obvious, i didn't see any mention in the thread so far
Thanks!
Bookmarks