So the delay button you added last, does that kill the track and just leave you with the delay trailing off? If so do you know if there is a way of ditching the button but have the fader/knob do that job when it reaches it highest point?
Neato.
Ps : your voice sounds *a lot* like the one in The Orb's "Little fluffy clouds" (which turned out to be Rickie Lee Jones ages ago).
I have my mpd24 setup to do fx in a similar way.
With my setup, I have the bottom row of pads toggle the fx units on/off for all 4 decks, and the remaining 12 pads turn all 12 chained fx on when held down. A fader controls the fx parameters instead of a knob, and I have the play/tempo bend/etc functions mapped to my qwerty keyboard, so I can get to them while goofing off in bank b of the mpd24.
The main diff in our setups is that instead of assigning a knob to turn on 3 fx at the same time, I just hold down a combination of the 12 pads and i'n not delegated to using the same 3 fx everytime.
Last edited by epsy; 01-26-2010 at 02:53 PM.
getta nice little condenser mic, do a little ghetto sound proof job in yr room & drop a few vocal samples.. i like your voice to.
Thanks for sharing
If you want the knob to kill your fx combo when you're all the way round, you'll have to create a new modifier which will be your knob. Now you set it up has a knob and you'll see (if you turn it) in the modifier states above the function panel that the value of the modifier goes to 0 to 7 (but quite quickly). You then define it as 'relative' and set up the sensitivity (and rotary speed) so when the knob is to the far left it equals 0 and to the far right it equals 7.
You then add the new functions that will either engage your delay's freeze or whatever you wanna set up with modifier=7 (or else depending at which stage you want those functions to happen during the course of your knob). Depending on how you set up those, you may also need to duplicate your function(s) so when you get you're knob back to the left the function(s) are set back to the original parameters when this new modifier=0.
Hope it helps.
Last edited by Yul; 01-27-2010 at 01:33 PM.
Great to know and Thank You !!!! I can also us that with the sound samples in a third or fourth deck dropping quick sampled sounds, nice work and thank you again
Chris aka DJ Panic
|
Bookmarks