For all of you that have experience broadcasting sets on ustream.

[GPS]

can you change the bitrate of the stream?
was you outputting too loud?
was traktor clipping, and making the input to ustream distorted?
try turning down the mic input volume in windows?

ok, sorry for the bump but i have some issues.

I have one output of my Audio 2 going to my headsets and the other into a splitter, one goes to my makie and the other to the mic in for ustream, before when i didnt try it everything sounded perfect, but with the splitter my levels are all over the goddam place

i lowered tehe mic in on my control panel, but i still have to lwoet the master out on traktor, pretty much renderin my mackie useless, but the stream sounds ok

another weird thing, i thought is try a sample set without using my speaker and only using tracks i knew, but when i raise my HEADSET level on my vci to cue the next track, the broadcast level goes all over the place on the broadcast!

any tohughts?

-gm

[biru]

Get soundflower and create an internal audio device which has some audio splits internally.

Then you can tell ustream to look at your soundflower device to get it's input.

[GPS]

Get soundflower and create an internal audio device which has some audio splits internally.

Then you can tell ustream to look at your soundflower device to get it's input.

http://jackaudio.org/download

would this be a good pc equivelant?
i dont have my mac yet

-gm

[GPS]

alright, so i got my mac and installed soundflower.

all seemed to be working well and setup the way it should (master out channel in my audio 2 split, one going to my speaker and the other to my macs combined in/out jack). I didnt even need to use soundflower

but wen i stream it picks up bot the input from my audio 2 as well as my macs mic.

I tried to simply turn it off in my system preferences but it only allows me to make it ery quite, yet my typing is still being broadcasted

any thoughts?

[theory28]

splitter- into mic- opposite to speakers.

[GPS]

splitter- into mic- opposite to speakers.

thats what i am doing. what i mean is that it is picking up only my mic, not the input, and its even treating the dedicated in/out as only an out it seems

[theory28]

sorry, i opened the thread and forgot that theres 2 pages

[GPS]

ok after messing around with it i think i foundout how to fix it.

I need someone to help me in setting up soundflower, i do not know whether to use 2 ch or 16 ch.

see their are 4 channels on my out from traktor to my audio 2: output out 1 and 2 (left and right) go to my channel A out on my audio 2, which is split (one going to my speaker and the other back to my laptop)(would this make my speaker recieving only the left or right signal and the one going back to my laptop the other?) and output out 3 and 4 are the left and right for my monitor, which goes to my headsets from output B on my audio 2.

I supppose i need to find a way to set soundflower as my input with the output out channel (1 or 2) that goes back into my laptop, correct? if so, may someone walk me through this?

thanks!

Gianamrco

[GPS]

ok after messing around with it i think i foundout how to fix it.

I need someone to help me in setting up soundflower, i do not know whether to use 2 ch or 16 ch.

see their are 4 channels on my out from traktor to my audio 2: output out 1 and 2 (left and right) go to my channel A out on my audio 2, which is split (one going to my speaker and the other back to my laptop)(would this make my speaker recieving only the left or right signal and the one going back to my laptop the other?) and output out 3 and 4 are the left and right for my monitor, which goes to my headsets from output B on my audio 2.

I supppose i need to find a way to set soundflower as my input with the output out channel (1 or 2) that goes back into my laptop, correct? if so, may someone walk me through this?

thanks!

Gianamrco

anyone?

bueler?

[greatmesk]

I occasionally stream on ustream. But i use the ustream producer freeware. I stream from the same laptop that i spin on. This is my setup

Controller into laptop into audio 2. Audio 2 goes into a external mixer but i mix internal. The mixer output goes to my amp and to the laptop mic. I tell ustream to use the mic-in and it works very well once i did setup the levels. This way i mix and stream from the same laptop without issues and people can watch me scratch. But i noticed that viewers need a good connection, i.e. a umts stick wont work.