How to map DDM 4000 in Traktor 1.2.1

[jacktharipper]

Oh and Im a newbie and not very tech savvy obviously so please go easy on me

[Mark Rutherford]

I had the same problem with my DDM 4000

Since im bored

I'm going to make a walk-through on setting up your DDM 4000.

Ok well start with the things we need

Behringer ddm4000



Midi to USB I use M-Audio Midisport Uno
http://www.m-audio.com/products/en_us/Uno.html

PC/Mac


Traktor Scratch Pro 1.2.1 (not sure if thats the lastest update)

Ok after we have everything we need we now need to set up Traktor.


First go to Preferences>Controller Management>Select Generic Midi form Device Menu Box

Then click on import at the bottom of the Preferences it will open up another window with three folders Default Setting, Keyboard Settings, and Midi Mapping



Click on Midi Mapping>Behringer>Behringer DDM4000.tsi and click open


It will now open with another window Select Categories to import
click ok.

Now we set up the Behringer DDM4000

Press and Hold the Console setup knob it will go into a setup box


Scroll Down to MIDI settings


It will now change to a MIDI Set Box
select and click on what parts of the DDM 4000 you want to use as a MIDI

DON'T FORGET TO SELECT YOU CHANNELS!
You can use FX 2 to scroll and select your Channels


Your DDM 4000 should now be midi enabled
test it out and your MIDI box at the top should light up when using your mixer

I would of posted more pics but the forum only let me put up 6.

I hope this helps
I wasn't sure where to start with this walk-through so I started with the basics and tried to be thorough as possible.

you don't know how much this helped me, thanks