@dj4niq
ok cool, sounds like your half way there. Bummer you had to re-learn the midi notes, i was really hoping that the midi notes from my launchpad were the same as yours, however, not a problem. The toughest part is knowing how to do this in the first place.
For your particular problem regarding LED feedback, the fix should be simple. For the purposes of this example, lets focus on the "A" Deck. (This corresponds to the A-launchpad.tsi file i have in my original posting)
For this example, we'll map out one of the hotcue LED's on the "A" deck...
1. Open up Controller-Manager in traktor's preferences
2. Make sure "A-launchpad - Gerenic Midi" is selected from the "Device" drop down.
3. In the "Assignment table", look for "Select/Set-Store Hotcue" and make a note of which midi note it's mapped to according to your setup. On mine, its midi note "Ch01.Note.C-1"
4. Now in the "Assignment Table" look for "Hotcue1 State"
5. Enter the midi note you have from step 3. (On mine its "Ch01.Note.C-1")
6. Load a track into Deck A.
The LED should be on at this point because all the other settings (besides the actual midi note) have already been set via my mapping file (should be the same as well). You will have to do this for all the "Outs" in the midi assignment table because you have re-learned the midi notes for your particular launchpad.
Hope this helps, let me know if it does/doesn't and we'll go from there.
Bookmarks