Digital djing provides a wide set of tools that make your job better but one of the clearest benefits is the ability to see each songs waveform. A waveform is the play by play visual representation of the sonic action in a track. By watching wave forms you get an effective idea of what is currently happening and what is coming up so smart mix decisions can easily be made on the fly. In this article we will demonstrate the basics of the waveforms and show how 2 of the top dj systems Traktor and Serato enhance that information to make your job even easier.
Its really quite amazing that music, something we are so effected by, is really such a simple thing. The wave form you see above is expressing 2 fundamental things about one single sine wave, one of the most basic forms of sound.
1. Amplitude: How loud the signal is
2. Wavelength: What frequency it is. The wider or longer the the wave length, the lower the frequency.
A song is made up of many, many of these simple waves combined into one sonic image:
Its hard to separate the sounds visually from this view alone but with a little eye training you can begin to pick out some important trends and recognize various parts of the songs.
notice that in this first wave form the space between beats is sparse, this suggests minimal instrumentation and a good place to mix.
in this section a synth stab is added and the wave starts to get more busy
now that a vocal is added, the frequency spectrum really starts to fill up.
and here in the break down there is a complete absence of loud transients (beats)
A HELPING HAND
How a program visualizes the wave forms is entirely up to them so several dj programs enhance the wave form views to make it easier for us to recognize these various parts. You can also customize the wave view to suit your personal tastes. In Traktor you can choose how much of the wave form information is displayed to make the beats more defined and filter out non-rhythmic visuals.
in this image we are showing the same section using beats, beats & highs and beats + envelopes
In Serato, they have colorized the wave forms to distinguish parts of the beat structure.
Red = BassBlue=TrebGreen=Mid
You can alter the wave form view in Serato as well but its less obvious. To zoom in on the wav, simply click the deck and use + and -.
Another slightly hidden trick; by holding the control button and clicking on a deck you can remove the color coding of the wave form, and split the view into 3 channels separate waves (hi, mid, lo) for an even more accurate picture into the mix.
thanks for the tip on the 3 waves display on Serato. I accidentally changed it on my on deck and had no Idea what I did or how to change it back. It’s no were in the manual
[…] Reading Wave Forms | DJ TechTools – Digital djing provides a wide set of tools that make your job better but one of the clearest benefits is the ability to see each songs waveform. […]
[…] Reading Wave Forms | DJ TechTools – DJ TechTools The largest community for DJ and producer techniques, tutorials, and tips. Traktor secrets, controller reviews, a massive MIDI mapping library … […]
[…] Reading Wave Forms | DJ TechTools – The first software DJ program I started using was Virtual DJ – and then later I progressed to Torq. I have to say I preferred the way both of those did … […]
[quote comment=”26202″]@ sine143…
No kidding eh?! I have my degree in Recording Arts and Sound Engineering and can regurgitate everything they taught me about sound, but I still shake my head in amazement at how it all works… our ears included!
BTW, I recently recorded my latest dubstep mix without any headphone cueing, relying only on Traktors Waveforms and my knowledge of the tracks (granted I did spend an hour or so in play-list prep before hitting record). Just my macbook, novation controller straight through my laptops audio out into my PA. 100% success I’d say. ;o) http://www.mediafire.com/?tnyjxqy0nue Praise be the Gods of DVS technology![/quote]
what school did you go to?
@ sine143…
No kidding eh?! I have my degree in Recording Arts and Sound Engineering and can regurgitate everything they taught me about sound, but I still shake my head in amazement at how it all works… our ears included!
BTW, I recently recorded my latest dubstep mix without any headphone cueing, relying only on Traktors Waveforms and my knowledge of the tracks (granted I did spend an hour or so in play-list prep before hitting record). Just my macbook, novation controller straight through my laptops audio out into my PA. 100% success I’d say. ;o) http://www.mediafire.com/?tnyjxqy0nue Praise be the Gods of DVS technology!
Its all gone Pete Tong – haha..yeah you dont want that oversized badger shoveling junk and getting it all over the laptop.
Im glad Envelopes was discussed- that was important. Great Article
Article reminded me of Alexander Graham Bells early research into the drawing of sound waves on smoked glass by tracing their vibrations. Both his mother and wife were deaf he would use the image of a word in a sound wave over the smoked class to teach the deaf how to say the word perfectly. http://people.seas.harvard.edu/~jones/cscie129/images/snd_vis/snd_vis.html
short, sweet, simple. great article
Nice write…It made me think of that movie “Pete Tong, Its All Gone” movie from a while back. Great movie!
Good Stuff!
The first software DJ program I started using was Virtual DJ – and then later I progressed to Torq. I have to say I preferred the way both of those did it compared to Traktor Pro which I use now. The waveforms for deck A and B were on top of each other giving you a clear idea of where they were in comparison to eachother. You could almost beatmatch just by sight, very handy.
epic article as usual ean! educating the masses like me 🙂
all the programs with the waveforms, no matter how many times i use them, always remind me of the movie ‘its all gone pete tong’ where the deaf guy ended up making music and mixing solely off of what he could SEE in the waveform…
i love my Traktor Pro…
=Dj Dennis
[quote comment=”25782″]… and my elaborate tagging system.]
Anthony, Tagging is an issue that’s been discussed here before, but everybody has its own system.
Would you mind sharing your tagging system that works so great for you ?
Ean, djtechtools is awesome ! Thanks, a lot.
[quote comment=”25793″]
Except it’s all the same color! This annoys me about the Traktor manual too — it claims lows are a different color than highs but they’re all that barfy yellow color. [/quote]
I believe this refers to the full waveform overlay, not the scrolling section. on the other one you can clearly see a difference.
[quote comment=”25779″]I believe the envelope bit adds shading to differentiate between lows and highs. Beats focuses on the low end, Beats+Highs adds the top end but without any shading, and Beats+Env shades the highs a lighter color.[/quote]
Except it’s all the same color! This annoys me about the Traktor manual too — it claims lows are a different color than highs but they’re all that barfy yellow color. Maybe some bits are a darker shade than others but I certainly can’t tell if that’s the case, and the three example pics above look almost identical to me. There are differences but I’m not sure how those differences would help mixing as a practical matter since they are ever so slight. I know traktor users generally don’t like the serato colored wave forms but I do wish traktor wave forms were at least a bit more expressive.
[quote comment=”25784″]
Want to know why? Let me introduce you to Nyquist-Shannon’s Sampling Theory: http://en.wikipedia.org/wiki/Nyquist%E2%80%93Shannon_sampling_theorem%5B/quote%5D
Yeah man, I’ve done some reading into the whole issue… and it still blows my mind. The invention of the loudspeaker is quite pivotal imo.
[quote comment=”25786″]I’ve had to mix at several gigs going off of visual only guides. Monitors completely cut off several times and I was forced to rely on my tagging system and markers.. like Anthony mentions above. I also prefer Traktor Pro to Serato. I can’t tell you how often I ask DJ’s who use Serato what the colors mean and they have no idea. It’s distracting to me, but then again I’ve been using Traktor Scratch since the week it came out.. so I suppose it’s a comfort thing.[/quote]
LOL thats funny how people don’t know what the colours mean. It’s obvious! I guess theres people that don’t really dig into the programs as much and theres geeks like many of us here that go thru the ins and outs of our DVS to know the total functionality.
I’ve had to mix at several gigs going off of visual only guides. Monitors completely cut off several times and I was forced to rely on my tagging system and markers.. like Anthony mentions above. I also prefer Traktor Pro to Serato. I can’t tell you how often I ask DJ’s who use Serato what the colors mean and they have no idea. It’s distracting to me, but then again I’ve been using Traktor Scratch since the week it came out.. so I suppose it’s a comfort thing.
[quote comment=”25771″]…everything we are hearing is produced by 2 cones vibrating. I cant believe how accurate it can be…[/quote]
Want to know why? Let me introduce you to Nyquist-Shannon’s Sampling Theory: http://en.wikipedia.org/wiki/Nyquist%E2%80%93Shannon_sampling_theorem
Nice read – good stuff here – brings me back to audio editing in the 90’s when we first started to record digitally. Wish I had this back then would have helped with the trial and error learning. All the tools are the same but look at how far we have come and how they now apply!
Since my tracks are all tagged, keyed and beat-matched proper in Traktor Scratch Pro, if I ever go “It’s all gone Pete Tong” and loose my hearing I’m confident that I’ll still be able to DJ quite well visually.
Let’s hope it never comes to that,,, BUT I have had to mix a few gigs last year without headphone cuing, and never could have pulled those gigs off without Traktors waveform displays, phase meter and my elaborate tagging system.
It was quite fun actually… never quite knowing 100% whats on the other side of the X-fader till you open it up & then… NICE!!! =o)
AJ
P.S. New up btw, The Overdubber – Orion’s Belting Dubstep Mix:
http://www.mediafire.com/?tnyjxqy0nue
IIRC, envelope is more like how long the sound is lasting due to decay/release times, reverb, stuff like that. it’s different from the actual “beat” because it’s not as pronounced.
I believe the envelope bit adds shading to differentiate between lows and highs. Beats focuses on the low end, Beats+Highs adds the top end but without any shading, and Beats+Env shades the highs a lighter color.
Yeah the visual side is really an improvement that digital jing introduced,however, I noticed too that there is a risk, to concentrate too much on the visualization and ignore the ears….
By the way can anybody explain what the NI people meant by “envelope” – is that the mids?
Cheers
Cool post, I use dvs but every now and then I put a real vinyl on the deck and the funny thing is, virtually every time I play with a real record I find myself looking at the laptop for the waveform, doh! (plus I often hit a cue to bring the track back to the beginning, sooo stupid) Sometimes I do miss the different shades of black you’d get across real records, at least it used to keep the attention on your decks as looking at the waveform is often what steals my attention away from them. That said, I wouldn’t want to live without them now as they’re such a great tool for learning new tracks quicker.
++++
I love Traktor pro but I much prefer the colorized waveforms in serato, much clearer to understand. I bet my life some one’s going to moan about why you can’t put the waveforms side by side like you can in serato, I understand the benefit but I’m glad Traktor doesn’t do this as it would most probably just steal more of my attention. I played with the Xone Dx at BPM virtually all the day the itch gui has all four waveforms stacked on top of each other, which made it very easy to beat match visually 4 tracks quickly but to mix visually like that you end up having your eye’s glued to the screen.
i thank you for this site ean, the article and the every comment is so valuable.
thanks you all.
while this is only roughly related… It always truly amazes me when I think of how a speaker replicates sound or music, or how a microphone can record sound. I mean, we put our headphones on, and go about our daily business, but little do we think that everything we are hearing, is produced by 2 cones vibrating. I cant believe how accurate it can be…
“Its really quite amazing that music, something we are so effected by, is really such a simple thing.” well said man, haha, just was imaging damn near the same thing listing to music cleanin up my pad..then thought turned into one of those poem like designs where i perfectly describe my (music listing) experience so well i feel i should write it.. then a bad track comes on & it’s gone.
hah on topic that serado trick looks bad ass
Love the articles Ean keep em coming! But whats going on with the new tsi for FW 1.3 TPro 1.2.3? Its Jan 2010! And no update? Let us know what the progress is?
Happy Mixing!
SS
This is exactly what I needed. Thanks for the awesome article, Ean!